Building materials
Based On
China.
+
Countries
Served Proudly.
August 15
August 15, 2026Asbestos board unloading robot
-
admin
-
Building materials
-
7 Mins
Requirements for the workshop: The machine should operate in a covered workshop with a ceiling height of over 4 meters. The workshop must have a stable power supply and air supply, as well as a well-ventilated environment.
Choosing the location for machine placement is crucial for enhancing work efficiency (considering factors such as maintenance and safety). When defining the operator's work area, it is essential to anticipate the space required for general operations, machine maintenance, and personnel access. The operating space of the machine encompasses the activity areas for maintenance and personnel.
The surrounding environment and production conditions must not cause any interference with the machine control.
The floor where the robot base is installed must have a bearing strength greater than 2500kg/m2, and the thickness of the cement layer must be greater than 250mm. The base should be fixed to the ground using expansion screws, and the ground where the robot is installed (the plane connected to the robot) must be level.
The floor on which the conveying equipment is installed must have a bearing strength of more than 1000kg/m2, and the thickness of the cement layer must be greater than 100mm. The equipment should be fixed to the ground using expansion screws, and the ground where the equipment is installed must be level.